Package: mbr
Status: install ok installed
Priority: required
Section: base
Maintainer: Bruce Perens <Bruce@Pixar.com>
Version: 1.0.0-2
Description: Master Boot Record for IBM-PC compatible computers.
 This is used in booting Linux from the hard disk. 
 The MBR runs first, then transfers control to LILO, which transfers
 control to the Linux kernel.

Package: procps
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 270
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Version: 1.11.1
Replaces: watch
Provides: watch
Depends: libc5 (>= 5.2.18), ncurses3.0
Conflicts: watch
Description: The /proc file system utilities.
 This is an experimental release of the procps suite. A lot of features have
 been added since the 1.01(a) release:
 - support for both BSD and POSIX (SVR4) style command line options.
 - completely configurable display of information.
 - colour markup of processes exceeding limits or belonging to special users.
 Please take a look at /usr/doc/procps/NEWS, /usr/doc/procps/changelog.debian and
 the manpages for a concise list. This is how the next upstream release of
 procps may look (i.e. it will  look like this if there is not too much
 resistance).
 This is, for now, a debian-only package which should not appear outside of
 master.debian.org.
 .
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Michael Alan Dorman <mdorman@lot49.med.miami.edu>
Source: ncurses 1.9.9e-1
Version: 1.9.9e-1
Replaces: ncurses-term
Provides: ncurses-runtime
Conflicts: ncurses, ncurses-runtime
Description: Video terminal manipulation: Minimum set of terminals
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, sun, vt100, vt102, vt220,
 vt52, xterm and xterm-color.

Package: adduser
Status: install ok installed
Priority: required
Section: base
Installed-Size: 76
Maintainer: Christoph Lameter <clameter@debian.org>
Version: 2.11
Depends: findutils, perl, perl-suid
Description: Utilities to add users and groups to the system.
 Adduser can be invoked either as "adduser" or "addgroup" by
 the system administrator or by a batch job to add users and
 groups to the system. This program can also be used to add
 an existing user to an existing group.
 .
 Adding users with "adduser" is usually better than adding them
 by hand, since the new user's UID and GID are automatically
 selected, a home directory is created, skeletal user configuration
 files are copied to the new directory, and an initial password and
 finger information are set. The whole process can be customized by
 running a user defined script on adding a user.

Package: dialog
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 59
Maintainer: Leland Lucius <llucius@debian.org>
Version: 0.9a-8
Depends: libc5 (>= 5.2.18), ncurses3.0
Description: Displays user-friendly dialog boxes from shell scripts
 This application provides a method of displaying several different types
 of dialog boxes from shell scripts.  This allows a developer of a script
 to interact with the user in a much friendlier manner.
 .
 The following types of boxes are at your disposal:
   yes/no          Typical query style box with "Yes" and "No" answer buttons
   menu            A scrolling list of menu choices with single entry selection
   input           Query style box with text entry field
   message         Similar to the yes/no box, but with only an "Ok" button
   text            A scrollable text box that works like a simple file viewer
   info            A message display that allows asynchronous script execution
   checklist       Similar to the menu box, but allowing multiple selections
   radiolist       Checklist style box allowing single selections
   guage           Typical "progress report" style box
   tail            Allows viewing the end of files (tail) that auto updates
   backgroud tail  Similar to tail but runs in the background.

Package: lilo
Status: install ok installed
Priority: important
Section: base
Maintainer: Bernd Eckenfels <ecki@debian.org>
Version: 19-1
Depends: mbr
Description: LInux LOader - Loads Linux from the hard disk without a floppy.
 This program will set up your hard disk to boot Linux.

Package: setserial
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Gordon Russell <gor@dcs.napier.ac.uk>
Version: 2.10-8
Pre-Depends: libc5 (>= 5.2.18-1)
Conffiles:
 /etc/rc.boot/0setserial 6cb103f4f0ed83d9e24ab7c57744e7a6
Description: Configures serial ports.

Package: textutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Erick Branderhorst <branderh@debian.org>
Version: 1.19-1
Pre-Depends: libc5 (>= 5.2.18-8)
Description: The GNU text file processsing utilities.
 The utilities: cat cksum comm csplit cut expand fmt fold head join
 nl od paste pr sort split sum tac tail tr unexpand uniq wc.

Package: modules
Status: install ok installed
Priority: required
Section: base
Installed-Size: 188
Maintainer: Wichert Akkerman <wakkerma@wi.leidenuniv.nl>
Version: 2.0.0-15
Replaces: base
Pre-Depends: libc5 (>= 5.4.7-7)
Conffiles:
 /etc/init.d/modules 0802e673f2956f94b53a86518ba73239
 /etc/init.d/kerneld 663c9afd285ba747720cbc6ba2e59a70
 /etc/modules e8c7eeaee8243ed60eb4ed7d85bbac0d
 /etc/conf.modules 9dbd94857b0b232d236ac862595f6d81
Description: Linux module utilities.
 These utilities are intended to make a Linux modular kernel
 manageable for all users, administrators and distribution
 maintainers.

Package: ppp
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 189
Maintainer: Christoph Lameter <clameter@waterf.org>
Version: 2.2.0f-18
Replaces: isp-ppp
Depends: libc5 (>= 5.4.7-7), netbase
Suggests: mgetty (>= 0.99)
Conflicts: isp-ppp
Conffiles:
 /etc/init.d/ppp 3f2ebd7627230df5f8a0dfab4985c2e8
 /etc/ppp/options 15043454288f1b274d98c513efa5b0e4
 /etc/ppp/ip-up 6b74ca76c683faae47b8d296ce62099f
 /etc/ppp/ip-down d23bdf6bc5c24a494ce0f9449ce0c22b
 /etc/ppp/pap-secrets 551fae4f7f676a0d5c4eacae393ce3f5
 /etc/ppp.chatscript 59bea9ee069c1fef2f894e4cb91f644d
 /etc/ppp.options_out f0495c0303e3117d8e3215bc4805ea46
Description: Point-to-Point Protocol (PPP) daemon.
 The Point-to-Point Protocol (PPP) provides a standard way to
 transmit datagrams over a serial link, as well as a standard
 way for the machines at either end of the link (the "peers")
 to negotiate various optional characteristics of the link.  Using
 PPP, a serial link can be used to transmit Internet Protocol (IP)
 datagrams, allowing TCP/IP connections between the peers.
 .
 This ppp implements the following special features (folded in from the
 former isp-ppp package):
 - Remote DNS Server Configuration for Microsoft Clients and compat.
 - Remote WINS Server Configuration for Microsoft Clients amd compat.
 - Bug Fix to accomodate incoming buggy Winsock PPPs (Trumpet Winsock) dialup
 - Logs to LOG_LOCAL2 so that the ppp logs are completely separate.
 .
 Together with mgetty-0.99 this package will allow extremely easy dialup
 configuration for Win95, NT or Win3.11 with IE 3.0. The user simply has
 to type your phone number, username and password and the webbrowser will
 work! No strange IP numbers to configure for the customer.

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Austin Donnelly <and1000@debian.org>
Version: 3.0-2
Depends: sysvinit (>= 2.59-2)
Pre-Depends: libc5 (>= 5.2.18-1)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite.
 This package the bare minimum number of BSD utilities needed to boot a
 Debian system.
 .
 Included are: kill, logger, renice, script, wall, chroot

Package: ncurses3.0
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Michael Alan Dorman <mdorman@lot49.med.miami.edu>
Source: ncurses 1.9.9e-1
Version: 1.9.9e-1
Depends: libc5
Conflicts: ncurses
Description: Video terminal manipulation: shared libraries
 This package contains the shared libraries necessary to run programs
 compiled with the ncurses libraries.

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 80
Maintainer: Wichert Akkerman <wakkerma@wi.leidenuniv.nl>
Version: 2.05-11
Pre-Depends: libc5 (>= 5.2.18)
Description: The GNU sed stream editor.
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 15
Maintainer: Philippe Troin <phil@fifi.org>
Version: 1.2.0-3
Replaces: base
Conffiles:
 /etc/passwd 25effbf77701348ed1c60388c114b2c7
 /etc/group b1441f3d9c2b5c6ec25a7aab5d29db30
Description: 
 This package provides the /etc/passwd and /etc/group files containing
 Debian-allocated user and group IDs.

Package: passwd
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Guy Maor <maor@ece.utexas.edu>
Source: loginutils
Version: 1.0-5
Replaces: miscutils, chfn
Pre-Depends: libc5 (>= 5.2.18-2)
Conflicts: chfn
Conffiles:
 /etc/shells 471818f6c123aa3bc21cce003e29876f
Description: Change password data.
 This package contains passwd, chsh, chfn, vipw, and vigr.

Package: update
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 17
Maintainer: Guy Maor <maor@debian.org>
Version: 1.2-1
Replaces: bdflush, miscutils
Pre-Depends: libc5 (>= 5.2.18)
Conflicts: bdflush
Description: daemon to periodically flush filesystem buffers.
 The update daemon flushes the filesystem buffers at regular intervals.
 This version does not spawn a bdflush daemon, as this is now done by
 the kernel (kflushd).

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 324
Maintainer: Guy Maor <maor@debian.org>
Version: 2.5-9
Replaces: miscutils, setterm
Pre-Depends: libc5 (>= 5.4.13-1), ncurses3.0
Conflicts: setterm
Description: Miscellaneous system utilities.
 A mixed bag of system utilities: arch chkdupexe cfdisk clock cytune
 dmesg fdisk fsck.minix getopt hostid ipcrm ipcs kbdrate mcookie mkfs
 mkfs.minix mkswap more namei rdev setterm setsid sync tunelp whereis.

Package: fdflush
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 16
Maintainer: Wichert Akkerman <wakkerma@wi.leidenuniv.nl>
Version: 1.0.0-4
Description: A disk-flushing program.
  fdflush is a band-aid for floppy (or other) drivers with bad disk-change
  sensing. fdflush makes the system believe the disk-change switch has been
  triggered forcing the system to discard the buffered data.
  .
  If you have one of these slightly-broken disk drives, you'll have to run
  fdflush every time you change a disk

Package: libgdbm1
Status: install ok installed
Priority: standard
Section: base
Maintainer: Ray Dassen <jdassen@wi.LeidenUniv.nl>
Source: libgdbm
Version: 1.7.3-11
Provides: elf-libgdbm, libgdbm
Depends: libc5 (>= 5.2.16-1)
Conflicts: libgdbm, perl5 (<= 5.002-2), man (<= 2.3.10-5)
Description: GNU dbm database routines (runtime version).
 GNU dbm (`gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX `dbm' functions.
 .
 The basic use of `gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the `dictionary' Abstract Data Type
 (`hash' to perl programmers).

Package: libc5
Status: install ok installed
Priority: required
Section: base
Maintainer: David Engel <david@ods.com>
Source: libc5
Version: 5.4.13-1
Replaces: elf-libc
Provides: elf-libc, pthreads1
Pre-Depends: ldso (>= 1.7.14-2)
Conflicts: elf-libc, pthreads1
Description: The Linux C library version 5 (run-time libraries).
 Includes shared libraries needed to run programs built with libc 5.

Package: makedev
Status: install ok installed
Priority: required
Section: base
Installed-Size: 68
Maintainer: Bruce Perens <bruce@beagle.pixar.com>
Version: 1.5-2
Depends: libc5 (>= 5.4.13-1)
Conffiles:
 /etc/makedev.cfg fcc479b348e5e77c1cd3ec6af181c62c
 /etc/devinfo 51c99b29a04fa1d13751db282a6b2bd7
Description: Creates special device files in /dev.

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Michael Alan Dorman <mdorman@lot49.med.miami.edu>
Source: ncurses 1.9.9e-1
Version: 1.9.9e-1
Replaces: tput
Depends: ncurses3.0, libc5
Pre-Depends: ncurses3.0, libc5
Conflicts: ncurses, tput
Description: Video terminal manipulation: associated programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 1.11.8-5
Pre-Depends: libc5 (>= 5.2.18-1)
Description: GNU tar.

Package: ldso
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: David Engel <david@ods.com>
Source: ld.so
Version: 1.8.5-1
Replaces: libc
Provides: libdl1
Conffiles:
 /etc/ld.so.conf bcdcb23c5d5fb460cee2ce315ef7bd32
Description: The Linux dynamic linker, library and utilities.
 The dynamic linker provides the user-level support for loading and
 linking DLL and ELF shared libraries.  It is required by any program
 that uses shared libraries, which is just about all of them.

Package: modconf
Status: install ok installed
Priority: required
Section: base
Installed-Size: 225
Maintainer: Bruce Perens <bruce@pixar.com>
Version: 0.2.1
Depends: dialog, bash
Description: Device Driver Configuration
 Modconf providea a GUI for installing and configuring device driver modules.

Package: timezone
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Fernando Alegre <alegre@mars.superlink.net>
Version: 7.48-3
Conffiles:
 /etc/timezone e070b1d7e2ea05a77f04dde1b2fe481b
Description: Timezone utilities and data files.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 122
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 1.2.4-14
Depends: libc5 (>= 5.2.18)
Description: The GNU compression utility.
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: syslinux
Status: install ok installed
Priority: required
Section: base
Installed-Size: 48
Maintainer: Christoph Lameter <clameter@waterf.org>
Version: 1.30-1
Description: Boot disk creator.
 SYSLINUX is a boot loader for the Linux operating system which operates
 off MS-DOS floppies.  It is intended to simplify first-time installation
 of Linux.  It is *not* intended to be used as a general purpose boot
 loader; once the operating system is installed I recommend LILO as the
 boot loader, except for people whose root filesystem is a UMSDOS
 filesystem (where a DOS defragmenter could wreck havoc with LILO's
 carefully set up block tables) -- for them I recommend Loadlin (which
 loads Linux from the DOS command line).

Package: libnet
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 10
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Version: 1.01-2
Depends: perl (>= 5.003), io
Description: Implementation of Internet protocols for Perl
 libnet contains Perl implementations of the following protocols:
 Net::FTP (RFC959), Net::SMTP (RFC821), Net::Telnet (RFC854),
 Net::Time (RFC867 & RFC868), Net::NNTP (RFC977), Net::POP3 (RFC1939),
 Net::SNPP (RFC1861)
 It also contains various utility functions for implementing new
 protocols.

Package: kbd
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1238
Maintainer: Dominik Kubla <dominik@debian.org>
Version: 0.91-11
Replaces: open
Depends: libc5 (>= 5.4.7-7), sysvinit (>= 2.67)
Recommends: svgatextmode
Description: Linux console font and keytable utilities.
 This package allows you to set up the Linux console, change the font,
 resize text mode virtual consoles and remap the keyboard.
 .
 The Debian package of kbd does not use the resize capabilites, instead
 the usage of svgatextmode is recommended.  Since this utility also needs
 to load the appropriate screen font, font loading is also deferred to that
 package.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 493
Maintainer: Ian Jackson <ian@chiark.greenend.org.uk>
Version: 1.4.0.5
Pre-Depends: libc5 (>= 5.4.13-1), ncurses3.0
Description: Package maintenance system for Debian Linux
 This package contains the programs which handle the installation and
 removal of packages on your system.
 .
 The primary interface for the dpkg suite is the `dselect' program;
 a more low-level and less user-friendly interface is available in
 the form of the `dpkg' command.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 89
Maintainer: Bruce Perens <bruce@beagle.pixar.com>
Version: 1.2.0-4
Replaces: base, miscutils
Conffiles:
 /etc/adjtime b7920456f21d52fd516f7ff390112d1d
 /etc/host.conf a61b9f6548d337c1cc1e5a4de39f7b7f
 /etc/issue 5ad0d5b906882efe2584fa4d273e35f8
 /etc/motd fc264820577609a2966e0955ea6f6bb3
 /root/.bash_profile 14b61b52f32aae6169b37ea4e4aab092
 /root/.bashrc 118f882acfaf472e6a352b1baaf5db87
Description: Debian Base System Miscellaneous Files

Package: dpkg-ftp
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 39
Maintainer: Andy W.P. Guy <awpguy@acs.ucalgary.ca>
Version: 1.4.8
Depends: perl, dpkg (>= 1.2.0), libnet
Description: Ftp method for dselect.
 This package provides another method to dselect that uses
 the ftp protcol to fetch the desired packages from a debian
 ftp site.  To access it select 'ftp' from the Access menu in
 dselect.

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 181
Maintainer: Kevin Dalley <kevin@aimnet.com>
Version: 4.1-12
Pre-Depends: libc5 (>= 5.2.18)
Description: utilities for finding files--find, xargs, and locate
 These utilities find files meeting specified criteria and perform
 various actions on the files which are found.

Package: shellutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: David P. Boswell <daveb@tau.space.thiokol.com>
Version: 1.12-5
Pre-Depends: libc5 (>= 5.2.18-1)
Description: The GNU shell programming utilities.

Package: ae
Status: install ok installed
Priority: required
Section: base
Installed-Size: 61
Maintainer: Dale Scheetz <dwarf@polaris.net>
Version: 962-11
Depends: libc5 (>= 5.2.18), ncurses3.0
Description: Anthony's Editor -- a tiny full-screen editor
 ae is a tiny full-screen text editor with both modal (vi-like)
 and modeless (emacs-like) modes, determined by an ae.rc config file.
 .
 Keybindings are configurable in the startup file.

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 73
Maintainer: Wichert Akkerman <wakkerma@wi.leidenuniv.nl>
Version: 2.0-9
Pre-Depends: libc5 (>= 5.2.18)
Description: GNU grep, egrep and fgrep.
 The GNU family of grep utillities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Robert Leslie <rob@mars.org>
Version: 2.5l-1
Pre-Depends: libc5 (>= 5.2.18-1)
Description: Tools for mounting and manipulating filesystems.
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: getty
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Guy Maor <maor@ece.utexas.edu>
Source: loginutils
Version: 1.0-5
Replaces: miscutils
Pre-Depends: libc5 (>= 5.2.18-2)
Description: agetty, an alternative Linux getty.
 A SYSV/SunOS4 getty program with useful features for hardwired
 and dial-in tty lines.

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 483
Maintainer: Michael Nonweiler <mrn20@debian.org>
Version: 1.06-3
Pre-Depends: libc5 (>= 5.4.7-6)
Description: The EXT2 file system utilities.
 EXT2 stands for "Extended Filesystem", version 2. It's the filesystem
 type used for hard disks on Debian systems. This package contains programs
 for creating, checking, and maintaining EXT2 filesystems.

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 187
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Version: 2.69-1
Replaces: last, bsdutils (<= 2.0-2)
Pre-Depends: libc5 (>= 5.2.18-2)
Conflicts: last
Conffiles:
 /etc/init.d/boot bd6959429b33027b13005a56f1a554ca
 /etc/init.d/functions 0c0917923fade2b31aeba7ccff507b9d
 /etc/init.d/halt 98e8f6a870f463f4ce210c3e62952723
 /etc/init.d/rc 60e77848ea246f436d6e15ff4c8aa6b0
 /etc/init.d/reboot e678b2d6cd4e7f7ae8d49b266b00aa5a
 /etc/init.d/single 79ab06e4cb357207e0a2e0e12281478f
 /etc/init.d/skeleton 8ee22e239824b6d4a2abd17263d888d1
Description: System-V like init.
 Init is the first program to run after your system is booted, and
 continues to run as process number 1 until your system halts. Init's
 job is to start other programs that are essential to the operation of
 your system. All processes are descended from init. For more information,
 see the manual page init(8).

Package: perl-base
Status: install ok installed
Priority: required
Section: devel
Installed-Size: 581
Maintainer: Darren Stalder <torin@daft.com>
Source: perl
Version: 5.003.07-2
Pre-Depends: libc5 (>= 5.4.7-7), libdb1, libdl1, libgdbm1
Description: The Pathologically Eclectic Rubbish Lister
 Designed for the bootdisks, this only includes the bare essentials.

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Peter Tobias <tobias@et-inf.fho-emden.de>
Version: 2.0
Pre-Depends: libc5 (>= 5.2.18-1)
Description: A utility to set/show the host name or domain name
 The hostname command can be used to either set or display
 the current host or domain name of the system. This name is
 used by many of the networking programs to identify the machine.
 The domain name is also used by NIS/YP.

Package: fileutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Erick Branderhorst <branderh@debian.org>
Version: 3.13-4
Replaces: color-ls
Pre-Depends: libc5 (>= 5.2.18-9)
Conflicts: color-ls
Description: GNU file management utilities.
 The utilities: chgrp chmod chown cp dd df dir dircolors du install ln
 ls mkdir mkfifo mknod mv rm rmdir sync touch vdir.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Guy Maor <maor@ece.utexas.edu>
Source: loginutils
Version: 1.0-5
Replaces: miscutils
Pre-Depends: libc5 (>= 5.2.18-2)
Conffiles:
 /etc/securetty b2786c62a3aa9a21df2f3e4eb9e42ecd
Description: sign on to the system
 This package contains login and newgrp, which change the user and
 group respectively.

Package: libdb1
Status: install ok installed
Priority: standard
Section: base
Maintainer: Ray Dassen <jdassen@wi.LeidenUniv.nl>
Source: libdb
Version: 1.85.2-8
Provides: libdb
Depends: libc5 (>= 5.2.16-1)
Conflicts: libdb
Description: the Berkeley database routines (runtime version).

Package: mawk
Status: install ok installed
Priority: required
Section: base
Installed-Size: 144
Maintainer: Chris Fearnley <cjf@netaxs.com>
Version: 1.3.2-3
Provides: awk
Depends: libc5 (>= 5.4.7-5)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the Posix 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: libreadline2
Status: install ok installed
Priority: required
Section: base
Installed-Size: 143
Maintainer: Guy Maor <maor@debian.org>
Source: bash (1.14.7-2)
Version: 2.0.1-2
Provides: libreadline
Depends: libc5 (>= 5.4.7-7), ncurses3.0
Conflicts: librl (<= 2.0.3-2), libreadline
Description: GNU readline and history libraries, run-time libraries.
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: netbase
Status: install ok installed
Priority: standard
Section: net
Maintainer: Peter Tobias <tobias@et-inf.fho-emden.de>
Version: 2.06-1
Replaces: netstd (<< 2.00)
Depends: libc5 (>= 5.2.18)
Recommends: netstd (>= 2.00)
Conffiles:
 /etc/init.d/netbase 417200e9c22b5f4488d19ceabc8fa72f
 /etc/gateways a7503b386fe803313210e201fa02e184
 /etc/protocols ffeb999437e9e69e03aa32991dfa487f
 /etc/services 89c63dbd3fc3aef967c2732a6484c73f
 /etc/hosts.allow 00c464628a18c520ff9b5aa47368dfb6
 /etc/hosts.deny 3c8c271d216386391a00f5376d353f5a
 /etc/rpc a5d6ea89a98449d83998b6b717215a03
Description: Basic TCP/IP networking binaries
 In order to make use of the network you need a few tools to
 configure it. This package contains all the necessary tools
 to configure the networking interfaces, to setup the routing
 tables and to start other services using the inetd server.

Package: diff
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 258
Maintainer: Dale Scheetz <dwarf@polaris.net>
Version: 2.7-13
Depends: libc5 (>= 5.2.18)
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 394
Maintainer: Guy Maor <maor@debian.org>
Version: 1.14.7-2
Pre-Depends: libc5 (>= 5.4.7-7), libreadline2 (>= 2.0.1-1), ncurses3.0
Conffiles:
 /etc/profile 2126802231b95136ee2e7d7435909afd
 /etc/skel/.bash_profile 9f8c1b78ada30b164f856ffe234edbce
 /etc/skel/.bashrc 118f882acfaf472e6a352b1baaf5db87
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).

Package: debianutils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 39
Maintainer: Guy Maor <maor@debian.org>
Version: 1.3
Replaces: miscutils, cron (<= 3.0pl1-31), debian-utils
Depends: libc5 (>= 5.2.18)
Conflicts: debian-utils
Description: Miscellaneous utilities specific to Debian.
 Debianutils includes installkernel mkboot run-parts savelog which.

Package: sysklogd
Essential: yes
Status: install ok installed
Priority: required
Section: base
Maintainer: Martin Schulze <joey@linux.de>
Version: 1.3-11
Replaces: syslogd
Provides: syslogd
Pre-Depends: libc5 (>= 5.2.18-1)
Conflicts: syslogd
Conffiles:
 /etc/syslog.conf 1158ff9e7d55009929f1b4f1673d0348
 /etc/init.d/sysklogd 91d2373e44a61c670f79e7a180c00ff8
 /etc/cron.weekly/sysklogd 4b8230ad5898fbc52f1036f701a5e340
Description: Kernel and system logging daemons.
 This package implements two system log daemons.  The syslogd daemon is
 an enhanced version of the standard Berkeley utility program.  This
 daemon is responsible for providing logging of messages received from
 programs and facilities on the local host as well as from remote
 hosts.
 .
 The klogd daemon listens to kernel message sources and is responsible
 for prioritizing and processing operating system messages.  The klogd
 daemon can run as a client of syslogd or optionally as a standalone
 program.  Klogd can now be used to decode EIP addresses if it can
 determine a System.map file.

